PANTA © FIX POWER JUMPERS는 특히 12A 전류의  응용 분야에 사용되는 유연한 평면 도체 커넥터입니다. 원형단면의 도체이기에 빠르고 안전하게 설치할 수 있습니다. PANTA © 라운드 – 플랫 – 라운드 기술로, 원형단면 구리선은 절연영역에서 압연된 평평한 형태를 갖추어 높은 진동과  굽힘 저항에 대한 최고 성능적 요구 사항을 보장합니다. 뿐만 아니라 진동 흡수 및 굽힘저항에 대한 탁월한 성능으로 높은 효율성을 요구하는 작업공정 그리고 진동적 특성의 보장을 위해 갖추어진 라운드에서 플랫으로 변환에 있어  노치를 제거함으로써 도체 단면의 형태 변환의 연결점에서 취약성을 획기적으로 보완한 특수부품용 입니다.

PRODUCT DESCRIPTION

  • high vibration and bending resistance
  • unbreakable and reliable connection
  • ready to install
  • Saving of working time and assembly costs
  • high labor productivity by simultaneous soldering of all connection points in the solder bath
  • up to 12 amps

CHARACTERISTICS

  • PANTA © FIX POWER assembled with PANCON connectors
  • Series MASCON type CEH
    • 3.96mm high power grid
    • Pole number 2-8 pin
    • Type of connection IDC (insulation displacement technology)
    • Wire size AWG 19
    • Solid wire types
    • Integrated polarization
    • Coding by coding pin
    • Current carrying capacity 6.0 A
    • Operating voltage VDE 0110-1 / 04.97
    • Operating temperature -55 ° C to 105 ° C
  • Series MASCON type CEP (end connector)
    • Pitch 2.54 mm
    • Pole number 2-15 pin
    • Type of connection IDC (insulation displacement technology)
    • Wire size AWG 21
    • Solid wire types
    • Coding by coding pin
    • Current carrying capacity 4.0 A
    • Operating voltage according to VDE 0110-1 / 04.97
    • Operating temperature -55 ° C to 105 ° C

HOW TO ORDER

 

OUTPUT DRIVES

TECHNICAL SPECIFICATIONS

PANTA © FIX POWER JUMPER

No. How to order F A P N M C K J
D Grid (mm) 2.5 2.54 3.5 3.96 5.0 5.08 7.0 7.5
Pole number max. 15 15 8th 8th 8th 8th 8th 8th
A Length (mm) 25-999 in 0.1 increments; Special length up to 5,000
B Edge insulation max. (mm) freely selectable until 10
B Edge insulation min. (mm) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
C Pin diameter (mm) 0.72 0.72 0.91 0.91 0.91 0.91 0.91 0.91
Wire size (AWG) 21 21 19 19 18 18 18 18
Flat conductor width (mm) 2.0 2.0 3.2 3.2 3.2 3.2 3.2 3.2
G Flat conductor thickness (μm) 200
Conductor materials Tinned 2-3 microns
Current carrying capacity at 20 ° C (A) 8th 8th 12 12 12 12 12 12
Rated voltage (V DC ) 300
Dielectric strength (V DC / min ) 1500

 

 

PANTA © FIX POWER SYSTEM with insulation displacement connector

No. The POWER Jumper The HIGH POWER connector
D Grid (mm) 2.54 3.96 Grid (mm) 3.96 HI power
Pole number max. 2-15 2-8 Pole number max. 2-8
A Length (mm) 25-999 Connection IDC
e Pin length (mm) 2.5-10 Wire size (AWG) 19
completion of forms A, B or C wire types solid
B Edge insulation min. (mm) 1.0 1.0 polarization integrated
C Pin diameter (mm) 0.72 0.912 coding through pins
Wire size (AWG) 21 19 Current carrying capacity(A) 6
G Flat conductor width (mm) 2.0 / 3.2 operating voltage VDE 0110 b / 2,79 Tab. 4
Flat conductor thickness (μm) 200 Operating temperature (° C) -55 to 105
Conductor materials tinned 2-3 microns
Current carrying capacity at 20 ° C(A) 4 6
Rated voltage (V DC ) 300
Dielectric strength (V DC / min ) 1500

The POWER Jumper – insulation materials

isolation polyester Nomex PEN polyimide
for grid (mm) 3.96
for conductor size (AWG) 19
Insulation resistance
(mass-signal-mass) (Ω)
> 10 10
Operating temperature (° C) -40 … +105 -40 … +125 -40 … +125 -40 … +125
Soldering temperature (° C / s) 250/4 260/5 260/5 260/5

 

PANTA © FIX POWER Catalog (PDF, 515 kB)

All Sumida catalogs are available for download »